Spigen Garage Wall Protector Pads – 2 Pack

The Spigen Garage Wall Protector Pads create a cushioned contact zone where a vehicle door regularly approaches a garage wall. Each black EVA foam pad uses a textured face to receive light routine contact and a mesh-reinforced peel-and-stick adhesive layer for installation on a suitable clean, dry surface. The two-pack can cover two door positions or provide a wider protected area for one parking space.

Key Features

• EVA foam cushioning: places a compressible layer between a vehicle door edge and a hard wall surface.
• Two-pad package: supports driver and passenger contact points or a broader single-side layout.
• Textured impact face: adds surface structure to the black protective pad.
• Mesh-reinforced adhesive: backs the peel-and-stick installation layer for a more stable bond on suitable surfaces.
• Position-specific placement: lets the installer align protection with the actual door-opening height and parking position.
• Low-profile black finish: keeps the garage treatment visually restrained while making the contact zone easy to identify.

Measure the contact point before installation

Park normally, open the door carefully and mark the height and horizontal range where contact is most likely. Clean and dry the wall, then confirm that paint, coating or masonry is sound enough for adhesive mounting. Apply firm, even pressure across the pad and follow the adhesive settling guidance before allowing contact. Repeated parking position changes may require a wider protected area or a different placement.

The foam is intended to cushion light door contact, not absorb a moving vehicle or correct inaccurate parking. It cannot prevent every scratch, dent or wall mark, especially if an exposed edge misses the pad or the door is opened forcefully. Use visual parking references and careful door operation alongside the protector.

Compatibility

• Best surface: clean, dry, flat and structurally sound surfaces that accept pressure-sensitive adhesive.
• Potentially unsuitable: dusty concrete, crumbling masonry, damp walls, heavily textured finishes, wallpaper or weak paint may not hold reliably.
• Removal boundary: strong adhesive can lift paint or leave residue; test an inconspicuous area and accept the surface risk before installation.
• Contact boundary: designed for light door-edge cushioning, not vehicle bumpers, parking stops, structural protection or crash impact.
• Inspection: replace a pad that loosens, tears, becomes heavily compressed or exposes adhesive where it can contact the vehicle.

Package Includes

• 2 x Spigen EVA garage wall protector pads
• Integrated mesh-reinforced adhesive backing
• Color: Black
• Cleaning supplies, vehicle and parking guides are not included

FAQ

• What problem do the pads solve?
  They cushion routine light contact between a vehicle door edge and a hard garage wall.
• Will they stick to bare concrete?
  Adhesion varies. Dusty, porous or uneven concrete may require another mounting solution and is not guaranteed.
• Can the adhesive damage paint?
  Yes. Removal may lift weak paint or leave residue, so test the surface before committing.
• Do they stop a car from hitting the wall?
  No. They are door-contact pads, not wheel stops, bumpers or parking sensors.
• How should I place both pads?
  Use them at two verified door heights or side by side when the likely contact zone is wider.